Aeropak Tyre Sealant Tire Repair Foam

Model NO.: ID-8309
Factory: Yes
OEM: Available
Use: for Emergency Use
Application: 1-6mm Holes
Trademark: Aeropak
Transport Package: 12PCS/CTN, 2500ctns/ 20FCL
Specification: 450ml, 650ml
Origin: Guangdong, China
HS Code: 35069190
Model NO.: ID-8309
Factory: Yes
OEM: Available
Use: for Emergency Use
Application: 1-6mm Holes
Trademark: Aeropak
Transport Package: 12PCS/CTN, 2500ctns/ 20FCL
Specification: 450ml, 650ml
Origin: Guangdong, China
HS Code: 35069190
Aeropak tyre sealant tire repair foam
Aeropak Tyre Sealant Tire Repair Foam
Features:
I-like tire sealer & inflator is designed to quickly seek-out and effectively seal most normal punctures and slow leaks. It is 100% applicable to breach within 6mm on tubeless rubber tyres of cars, motorcycles, electrical bicycles. No jack nor tyre-change is needed. One step procedure of tyre pumping and repairing is finished in seconds. It can also be filled into new tyres to prevent unexpected leakage. Non-toxic and odorless. No corrosion and no damage to the tire.

Uses:
Just connect, inflate & go! !
Aeropak Tyre Sealant Tire Repair Foam
Directions:
1. If possible remove object causing puncture.
2. Deflate the tyre; Shake the can well before use;
3. Screw connecting tube firmly onto tyre valve; Hold the can upright-button uppermost-remove protector cap-press button until tyre appears firm.
4. After pumping is finished, disconnect both ends of the tube. Immediately drive 3-5km to allow the sealer to spread in tyre and mend the puncture. Then check and adjust tyre pressure.

 
Item No.: ID-309
Can Size: 65mm D  x 158mm H
Package: 450ml x 12pcs/ctn
Carton Size: 275x205x205 mm
20ft Container Loading 2500  cartons
 

Aeropak Tyre Sealant Tire Repair Foam
Aeropak Tyre Sealant Tire Repair Foam
Aeropak Tyre Sealant Tire Repair Foam
Aeropak Tyre Sealant Tire Repair Foam
FAQ
Q1. Are you manufacturer?
A: Yes, we Shenzhen i-Like Fine Chemical is a professional manufacturer of aerosol products,  especially in car care products, Aeropak spray paints,  tyre sealer and inflators,  air dusters,  spray adhesives,  etc.  

Q2. What is your terms of payment?
A: Payment terms vary according to order quantity and agency policy, negotiable upon contact.  We'll show you the photos of the products and packages before loading the goods.

Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.

Q4. How about your delivery time?
A: Generally, it will take 25 to 30 days after receiving your advance payment. 

Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q6. What is your sample policy?
A: We can supply 2-3 samples for free,  but as this is aerosol products with pressurized gas,  it is dangerous goods, the courier cost is very high, say about USD 100-200 for 2kg parcels.  And the freight cost need to be prepaid by customers.

Q7: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ; Only you win first, and then we can win.
A2. We respect every customer as our friends and we sincerely do business and make friends with them, 
no matter where they come from.


Why to be AEROPAK distributor?
1.AEROPAK is US Style design with US standard quality and net weight.
2.AEROPAK products passed required tests and certificates like RoHS, REACH, etc..
3.AEROPAK is individually barcoded for every item and every color, which is good for stock control and retailing.
4.AEROPAK offers POS & SKU CSV information and English Flyers.
5.AEROPAK offers PDF & Printed Catalogue and Colorcharts.
6.AEROPAK's strong R&D will make more and more new products to expand your market shares.
7.AEROPAK will offer great support for your sales, including your information on our website, cans, catalogue and colorcharts, etc., and will offer many differnt gifts for your promotion, even will also support you for your local trade show.
8.AEROPAK will benefit you a reward of 1-2% of your yearly salesvolumet, according to your yearly order amount.
9.AEROPAK will accept upto 10% OA (Open Acount) according to your yearly order amount.
10.AEROPAK will invite our GOLD DISTRIBUTORS to China for a 7-days traveling. 


 
Item No. APK-8201
Can Size 65mm x 158mm H
Package 400ml x 12PCS/CTN
Carton Size 275x205x205 mm
20ft Container Loading 2500 cartons

  Aeropak tyre sealant tire repair foam
Aeropak Tyre Sealant Tire Repair Foam
Features:
I-like tire sealer & inflator is designed to quickly seek-out and effectively seal most normal punctures and slow leaks. It is 100% applicable to breach within 6mm on tubeless rubber tyres of cars, motorcycles, electrical bicycles. No jack nor tyre-change is needed. One step procedure of tyre pumping and repairing is finished in seconds. It can also be filled into new tyres to prevent unexpected leakage. Non-toxic and odorless. No corrosion and no damage to the tire.

Uses:
Just connect, inflate & go! !
Aeropak Tyre Sealant Tire Repair Foam
Directions:
1. If possible remove object causing puncture.
2. Deflate the tyre; Shake the can well before use;
3. Screw connecting tube firmly onto tyre valve; Hold the can upright-button uppermost-remove protector cap-press button until tyre appears firm.
4. After pumping is finished, disconnect both ends of the tube. Immediately drive 3-5km to allow the sealer to spread in tyre and mend the puncture. Then check and adjust tyre pressure.

 
Item No.: ID-309
Can Size: 65mm D  x 158mm H
Package: 450ml x 12pcs/ctn
Carton Size: 275x205x205 mm
20ft Container Loading 2500  cartons
 

Aeropak Tyre Sealant Tire Repair Foam
Aeropak Tyre Sealant Tire Repair Foam
Aeropak Tyre Sealant Tire Repair Foam
Aeropak Tyre Sealant Tire Repair Foam
FAQ
Q1. Are you manufacturer?
A: Yes, we Shenzhen i-Like Fine Chemical is a professional manufacturer of aerosol products,  especially in car care products, Aeropak spray paints,  tyre sealer and inflators,  air dusters,  spray adhesives,  etc.  

Q2. What is your terms of payment?
A: Payment terms vary according to order quantity and agency policy, negotiable upon contact.  We'll show you the photos of the products and packages before loading the goods.

Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.

Q4. How about your delivery time?
A: Generally, it will take 25 to 30 days after receiving your advance payment. 

Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q6. What is your sample policy?
A: We can supply 2-3 samples for free,  but as this is aerosol products with pressurized gas,  it is dangerous goods, the courier cost is very high, say about USD 100-200 for 2kg parcels.  And the freight cost need to be prepaid by customers.

Q7: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ; Only you win first, and then we can win.
A2. We respect every customer as our friends and we sincerely do business and make friends with them, 
no matter where they come from.


Why to be AEROPAK distributor?
1.AEROPAK is US Style design with US standard quality and net weight.
2.AEROPAK products passed required tests and certificates like RoHS, REACH, etc..
3.AEROPAK is individually barcoded for every item and every color, which is good for stock control and retailing.
4.AEROPAK offers POS & SKU CSV information and English Flyers.
5.AEROPAK offers PDF & Printed Catalogue and Colorcharts.
6.AEROPAK's strong R&D will make more and more new products to expand your market shares.
7.AEROPAK will offer great support for your sales, including your information on our website, cans, catalogue and colorcharts, etc., and will offer many differnt gifts for your promotion, even will also support you for your local trade show.
8.AEROPAK will benefit you a reward of 1-2% of your yearly salesvolumet, according to your yearly order amount.
9.AEROPAK will accept upto 10% OA (Open Acount) according to your yearly order amount.
10.AEROPAK will invite our GOLD DISTRIBUTORS to China for a 7-days traveling. 


 
Item No. APK-8201
Can Size 65mm x 158mm H
Package 400ml x 12PCS/CTN
Carton Size 275x205x205 mm
20ft Container Loading 2500 cartons

 

Cap embroidery machine

Embroidery Machines,Sewing Machine Industrial,1 Head Embroidery Machines

HEFENG COMPUTERIZED EMBROIDERY MACHINES LIMITED , http://www.hk-embroiderymachine.com