Ai Silu analyzes the operation precautions of the high-low temperature damp heat test box

Do not open the door of the cabinet during the test unless it is necessary during the test, otherwise it may cause the following undesirable consequences:
1. The inner side of the door still maintains a high temperature (causing a burn)
2. High temperature air may trigger fire alarm and cause malfunction
3. High-temperature airflow out of the box (very dangerous)
Second, before doing low temperature, the studio should be wiped dry at 60 °C 1h
Third, to prohibit the test of explosive, flammable and highly corrosive substances
Fourth, if the box is placed in a hot sample, the sample power control, please use the external power supply, do not directly use the machine power supply. When putting in a high-temperature sample for a low temperature test, it should be noted that the time to open the door must be as short as possible.
5. Circuit breakers and over-temperature protectors provide safety protection for the test products and operators of the machine, so check regularly.
6. Avoid shutting down and restarting the refrigeration unit in three minutes
7. The lights should be turned off except when necessary, and should be turned off the rest of the time.
8. Please note that the machine must be grounded safely to avoid static induction
9. On any section of the vertical dominant wind direction, the sum of the cross-sectional areas of the test load shall not be greater than one third of the working section at that location.
Ten, when doing high temperature test, when the temperature exceeds 55°C, do not open the cold machine.
Ai Sihao - professional manufacturer of high and low temperature test cases , adhering to the six principles of quality, professionalism, high efficiency, honesty, pragmatism and innovation, has always been at the forefront of the industry, welcome customers to inquire or visit the factory!
There is no good, only better! Dongguan Ai Si in the industry tide, continuous progress, continuous innovation! Product quality checks at every level, for the customer to think, for the customer to ensure. Welcome customers to inquire.

Solid Waste Crusher

China Industrial Wood Chipper,Solid Waste Crusher Machine,Waste Wood Cutting Machine,Solid Waste Crusher, we offered that you can trust. Welcome to do business with us.

Palm Crusher.Our GQJ series double rollers shearing crusher absorbs the quintessence of shearing crusher from abroad. We design and produce it as per the fibrous raw material processing industry. It absorbs double rollers differential speed flower knife structure, so it solves the problems of easy winding and hard cutting for fibrous raw materials. It has the following features: high efficiency, energy conservation, low-loss, no noise and no dust. This crusher is our careful researches, domestic initiative new product, and reach the international advanced level.

Waste Crusher.Double rollers shearing crusher is the best choice for easy winding and hard cutting fibrous raw materials. It is widely used in energy industry, chemical industry and environment-protection field. And it s the ideal crushing equipment with low investment, high profit and no risk.

Industrial Wood Chipper,Solid Waste Crusher Machine,Waste Wood Cutting Machine,Solid Waste Crusher

Shandong Yulong Machine Co.,Ltd , https://www.yulong.cc