Cast Iron Butterfly Valve

Model NO.: Butterfly Valve
Thread Position of Valve Rod: Inside Gate Valve
Usage: Flow Control
Standard: BS DIN Awwa
Application: Water Industrial Usage
Trademark: MPM
Transport Package: Plywood Cases
Specification: DN40-DN1200
Origin: China
HS Code: 8481804090
Type Standard Specification Size Pressure
Resilient Seated Gate valve BS BS5163 Type A DN40-DN900 PN10/16/25
BS5163 Type B DN50-DN300 PN10/16
BS1218 DN40-DN400 PN10/16
DIN DIN3352-F4 DN40-DN900 PN10/16
DIN3352-F5 DN40-DN900 PN10/16
AWWA AWWAC515 DN50-DN600 125/150LBS
AWWAC509 DN50-DN300 125/150LBS
TaiWan TaiWan Standard DN50-DN600 7.5/10K
Korean KSB 2334 DN50-DN600 5/10/16K
SABS SABS 664/665 DN40-DN600 PN10/16
SABS669 DN50-DN315 PN10/16
ISO ISO2531 DN50-DN300 PN10/16
         
Metal Seated Gate valve BS BS5163 Type A DN40-DN600 PN10/16
BS5163 Type B DN50-DN300 PN10/16
BS3464 DN40-DN300 PN10/16
DIN DIN3352-F4 DN40-DN400 PN10/16
DIN3352-F5 DN40-DN400 PN10/16
AWWA AWWA C500 DN40-DN600 125/150LBS
SABS SABS 664/665 DN40-DN600 PN10/16
         
Swing Type
Check Valve		 BS BS5153 DN40-DN400 PN10/16
AWWA AWWAC508 DN40-DN400 125/150LBS
DIN DIN3202 F6 DN40-DN400 PN10/16
DIN3202 F1 DN15-DN300 PN10/16
         
Ball Type
Check Valve		 BS BS5153 DN40-DN300 PN10/16
DIN DIN3202 F6 DN40-DN300 PN10/16
         
Butterfly Valve BS BS5155 DN40-DN1200 PN10/16
         
Globe Valve BS BS5152 DN10-300 PN10/16
DIN DIN3202 F1 DN10-300 PN10/16
DIN3356 DN10-300 PN10/16
ANSI MSS-SP-85 DN10-300 125LBS
JIS MSS-SP-85 DN10-300 JIS10K
         
Y- strainer EN EN1074 DN10-DN450 PN10/16
BS BS2080 DN10-DN450 PN10/16
DIN DIN3202 F1 DN10-DN450 PN10/16
         
Air Valve EN EN1074 Single DN50-DN200 PN10/16
EN1074 Doulbe DN40-DN150 PN10/16
EN1074 Thread DN25-DN50 PN10/16
         
Foot Valve EN EN1074-5 DN50-DN300 PN10/16
         
Fire Hydrant BS BS750 DN65-DN80 PN10/16
Cast Iron Butterfly Valve


 

This kind of Stator Forming Machine can meet the requirement of different stator and coil  dimension. It makes the whole forming process far more iconvinient than by manual. This machine can also be connected to Stator Production Line to meet the mass production requirement.



It can greatly reduce the larbor forces. With the hydraulic pressing system, this machine is pushed by the oil cylinder. Controlled by the PLC, the coil forming dimension can be set by mechanical adjustment. The operation step is very simple. Firstly, operator needs to load the stator to the required tooling position. Then press the start button. Machine will do the forming process.


Middle Forming Machine

Middle Forming Machine,Intermediate Forming Machine,Stator Forming Machine,Coil Shaping Machine

Ningbo Nide Mechanical Equipment Co., Ltd. , http://www.nide-auto.com