Electric Monorail Cable Hoist Trolley 3 Ton
1. Payment terms is flexible.  Warranty: Industrial Zone, Weizhuang Hanliao District, Changyuan County, Xinxiang City, Henan Province, China. 1. Payment terms is flexible.  Warranty: Industrial Zone, Weizhuang Hanliao District, Changyuan County, Xinxiang City, Henan Province, China. Die Casting Copper Part,Motorcycle Spare Parts,Motorcycle Spare Parts WINDUS ENTERPRISES INC. , http://www.yk-diecasting.com
Brief Introduction
CD1 MD1:Â wire rope electric hoists can be widely used to lift heavy objects, or installed on the straight or curve I-section steel beam of single beam cranes. They can also be used together with Electric Hoist Double beam gantry cranes and jib cranes. All the above has made the electric hoists common in industrial and mining enterprises, railway, wharfs and warehouses etc.
Motor: Hoist Motor is a taper type rotor motor with braking, it is made by Nanjing special motor factory, it is of the best quality motors, it has bigger torque, so it can be adapted to moving frequently, the Maximum torque is 2.4-3 times than the rated torque.
Gear Box: Hoist Gear Box has specially treated gears for high wear resistance. Each Geared Shaft assembly is supported on ball or roller bearings, to ensure smooth, low-friction operation.
Wire Rope: Hoisting ropes comply with the exporting standards. The leading rope taken by the Drum does not slip sideways when slack. The factor of safety, on the nominal breaking strength of the rope is six.
 Rope Drum: Grooved Drum, seamless pipe of adequate length to be wounded in one layer and to provide proper support for the rope to minimize abrasive wear is provided. Drum Shaft resolves on Ball Bearings for ensuring smooth running.
 Electric apparatus controlling system: Model CD1 and MD1 is composed of the contactor box, controlling switch, cut-off limiter, the working voltage of controlling switch is 380V,36V or 24V(safety voltage).
Rope Guide: Rope Guide is in two halves, ensuring easy accessibility. It encircles the Drum completely so that the rope may not uncoil even when the Hoist is in unloaded condition. The rope guides of our company is thickened and dilated, so that it is not easy to be damaged.
Hook:Â The Hook Block is tested to 150 % of full load before assembly. The rope sheaves are fully guarded with protective Steel Casting. All sheaves rotate on ball bearing the pulley is thicken and dilated than domestic common pulley.
Â
Model
CD1 MD1
Capacity
Tons
0.25
0.5
1
2
3
5
10
16
Hoisting height
M
3,6,9
6,9,12
6,9,12,18,24,30
9,12,18,24,30
Hoisting speed
M/MIN
8(0.8/8)
8(0.8/8)
8(0.8/8)
7(0.7/7)
3.5 (0.35/3.5)
Travel speed
M/MIN
20
20/30
20/30
20/30
20/30
20/30
20/30
18
WireropeÂ
Dia.(mm)
3.6
4.8
7.4
11
13
15
15
17.5
Spec.
6x39
6x37+FC
6x37+FC
6x37+FC
6x37+FC
Hoisting motor
Type
ZD112-4
ZD121-4
ZD122-4
ZD131-4
ZD132-4
ZD141-4
ZD151-4
ZD151-4
ZDS1Â
0.2/0.8ZDS1Â
0.2/1.5ZDS1Â
0.4/3.0ZDS1 0.4/4.5
ZDS1Â
0.8/7.5ZDS1Â
1.5/13ZDS1 1.5/13
Power (KW)
0.4
0.8
(0.2/0.8)1.5
(0.2/1.5)3.0
(0.4/3.0)4.5
(0.4/4.5)7.5
(0.8/7.5)13(1.5/13)
13(1.5/13)
speed (r/min)
1380
1380
1380
1380
1380
1400
1400
1400
Current (A)
1.25
2.2
(0.72/2.4)4.3(0.72/4.3)
7.6(1.25/7.6)
11
(2.4/11)18
(2.4/18)30(5.2/30)
30(5.2/30)
Travel motor
Type
ZDY110-4
ZDY111-4
ZDY111-4
ZDY112-4
ZDY112-4
ZDY121-4
ZDY121-4
ZDY121-4
Power (KW)
0.06
0.2
0.2
0.4
0.4
0.8
0.8x2
0.8x2
speed (r/min)
1400
1380
1380
1380
1380
1380
1380
1380
Current (A)
0.3
0.72
0.72
1.25
1.25
2.4
2.4
2.4
PowerÂ
AC 380V,50HZ,3P (By your demand)
Packaging &Â Delivery:
 
Company Information:
Xinxiang Anlian Crane Construction Machinery Co., Ltd., the main business:Â
electric hoist, hoist, crane motors, conical motors, vibration motors, concrete vibrators and hoist accessories, Which widely used in various fields of materials handling, such as Machinery Manufacturing, iron and steel metallurgy, mine mining, water conservancy and hydropower, road and rail, port logistics, shipbuilding and so on. Founded in 1993, currently has a registered capital of 10 million yuan, more than 200 employees, 20 engineers and technicians, covers an area of 24,000 square meters, with all kinds of production equipment 90 (sets).
Ordering Information:
About Product:
Please inform us the following data for the purpose of servicing you better!
1. Lifting capacity.
2. Lifting height.(hook center to ground)
3. Span(rail center to rail center)
4. Power supply: Voltage.
5. Working condition: material of this product and working temprature
6. Would be better if you have drawings of your plant.
About Delivery: 30days after receiving your deposit and after the order confirmed.
About Payment: L/C, T/T, Western Union.
Services we can provide:Â
Â
2. Design the crane according to your technical request.
3. Delivery on time.
4. Our engineer can arriving to the installation site to help fixing the crane for you.
5. Diversity products.
6. Warranty: 12 months.
1.1 (one)year guarantee for main body.
2. we provide free maintenances for spare parts, but the new components replaced should be paid.
3. we arrange engineer to supervise installation, make the load test, do commissioning, train of the buyer's workers.
4. Technique support: Exclusive engineer support at any time .
Any inquiry, pls feel free to contact us!
Contact Information:
Â
Amy Guo Xinxiang Anlian Crane Construction Machinery Co., Ltd.
   W: http://alqz.en.alibaba.com
Brief Introduction
CD1 MD1:Â wire rope electric hoists can be widely used to lift heavy objects, or installed on the straight or curve I-section steel beam of single beam cranes. They can also be used together with Electric Hoist Double beam gantry cranes and jib cranes. All the above has made the electric hoists common in industrial and mining enterprises, railway, wharfs and warehouses etc.
Motor: Hoist Motor is a taper type rotor motor with braking, it is made by Nanjing special motor factory, it is of the best quality motors, it has bigger torque, so it can be adapted to moving frequently, the Maximum torque is 2.4-3 times than the rated torque.
Gear Box: Hoist Gear Box has specially treated gears for high wear resistance. Each Geared Shaft assembly is supported on ball or roller bearings, to ensure smooth, low-friction operation.
Wire Rope: Hoisting ropes comply with the exporting standards. The leading rope taken by the Drum does not slip sideways when slack. The factor of safety, on the nominal breaking strength of the rope is six.
 Rope Drum: Grooved Drum, seamless pipe of adequate length to be wounded in one layer and to provide proper support for the rope to minimize abrasive wear is provided. Drum Shaft resolves on Ball Bearings for ensuring smooth running.
 Electric apparatus controlling system: Model CD1 and MD1 is composed of the contactor box, controlling switch, cut-off limiter, the working voltage of controlling switch is 380V,36V or 24V(safety voltage).
Rope Guide: Rope Guide is in two halves, ensuring easy accessibility. It encircles the Drum completely so that the rope may not uncoil even when the Hoist is in unloaded condition. The rope guides of our company is thickened and dilated, so that it is not easy to be damaged.
Hook:Â The Hook Block is tested to 150 % of full load before assembly. The rope sheaves are fully guarded with protective steel casting. All sheaves rotate on ball bearing the pulley is thicken and dilated than domestic common pulley.
Â
Model
CD1 MD1
Capacity
Tons
0.25
0.5
1
2
3
5
10
16
Hoisting height
M
3,6,9
6,9,12
6,9,12,18,24,30
9,12,18,24,30
Hoisting speed
M/MIN
8(0.8/8)
8(0.8/8)
8(0.8/8)
7(0.7/7)
3.5 (0.35/3.5)
Travel speed
M/MIN
20
20/30
20/30
20/30
20/30
20/30
20/30
18
WireropeÂ
Dia.(mm)
3.6
4.8
7.4
11
13
15
15
17.5
Spec.
6x39
6x37+FC
6x37+FC
6x37+FC
6x37+FC
Hoisting motor
Type
ZD112-4
ZD121-4
ZD122-4
ZD131-4
ZD132-4
ZD141-4
ZD151-4
ZD151-4
ZDS1Â
0.2/0.8ZDS1Â
0.2/1.5ZDS1Â
0.4/3.0ZDS1 0.4/4.5
ZDS1Â
0.8/7.5ZDS1Â
1.5/13ZDS1 1.5/13
Power (KW)
0.4
0.8
(0.2/0.8)1.5
(0.2/1.5)3.0
(0.4/3.0)4.5
(0.4/4.5)7.5
(0.8/7.5)13(1.5/13)
13(1.5/13)
speed (r/min)
1380
1380
1380
1380
1380
1400
1400
1400
Current (A)
1.25
2.2
(0.72/2.4)4.3(0.72/4.3)
7.6(1.25/7.6)
11
(2.4/11)18
(2.4/18)30(5.2/30)
30(5.2/30)
Travel motor
Type
ZDY110-4
ZDY111-4
ZDY111-4
ZDY112-4
ZDY112-4
ZDY121-4
ZDY121-4
ZDY121-4
Power (KW)
0.06
0.2
0.2
0.4
0.4
0.8
0.8x2
0.8x2
speed (r/min)
1400
1380
1380
1380
1380
1380
1380
1380
Current (A)
0.3
0.72
0.72
1.25
1.25
2.4
2.4
2.4
PowerÂ
AC 380V,50HZ,3P (By your demand)
Packaging &Â Delivery:
Â
Company Information:
Xinxiang Anlian Crane Construction Machinery Co., Ltd., the main business:Â
electric hoist, hoist, crane motors, conical motors, vibration motors, concrete vibrators and hoist accessories, Which widely used in various fields of materials handling, such as Machinery Manufacturing, iron and steel metallurgy, mine mining, water conservancy and hydropower, road and rail, port logistics, shipbuilding and so on. Founded in 1993, currently has a registered capital of 10 million yuan, more than 200 employees, 20 engineers and technicians, covers an area of 24,000 square meters, with all kinds of production equipment 90 (sets).
Ordering Information:
About Product:
Please inform us the following data for the purpose of servicing you better!
1. Lifting capacity.
2. Lifting height.(hook center to ground)
3. Span(rail center to rail center)
4. Power supply: Voltage.
5. Working condition: material of this product and working temprature
6. Would be better if you have drawings of your plant.
About Delivery: 30days after receiving your deposit and after the order confirmed.
About Payment: L/C, T/T, Western Union.
Services we can provide:Â
Â
2. Design the crane according to your technical request.
3. Delivery on time.
4. Our engineer can arriving to the installation site to help fixing the crane for you.
5. Diversity products.
6. Warranty: 12 months.
1.1 (one)year guarantee for main body.
2. we provide free maintenances for spare parts, but the new components replaced should be paid.
3. we arrange engineer to supervise installation, make the load test, do commissioning, train of the buyer's workers.
4. Technique support: Exclusive engineer support at any time .
Any inquiry, pls feel free to contact us!
Contact Information:
Â
Amy Guo Xinxiang Anlian Crane Construction Machinery Co., Ltd.
   W: http://alqz.en.alibaba.com