New Solutions for Electrostatic Manual Coating
Auto Water Pump Bearing Ring,Auto Water Pump Shaft,Water Pump Bearing Ring,Automotive Water Pump Bearings Xinchang Newsun Xintianlong Precision Bearing Manufacturing Co.,Ltd , https://www.xtlbearing.com
this new powder coating booth with PLC controller,could control the powder coating booth more accurate.we could provide you the powder coating booth that will fit your needs. the powder coating spray booth fans draw air through filters . as the cartridge filters load,air flow decreases and the negative pressure rises within the air handler. a timer activates a system of air purging valves that clear the cartridge filters of the accumulated powder to ensure max filter life.
Durable, long-life powder-coated steel structure with high-quality galvanized canopy and floor.
Low-profile booth base eliminates operator platforms
Requires only quick, easy connect electrical and pnematics to start production
Specifications:
Operator dimensions: 2300x 1700x1500mm
Overall dimensions: 2550x 2240x 2140mm
Weight:450kgs
Power suppl : electric
Nominal power: 3.5KW
Voltage: 380V
Frequeny : 50-60hz
Filter: 4 pcs polyester , easy for change
Filter cleaning system: Pneumatic
Powder coating machines COLO-800D
COLO classic powder coating spray gun ,working so good for most of the workpieces.
Powder Gun
Gun weight:
500G
Rated output voltage
24VDC
Input voltage
 - 200kv
Maximum output current
180Ua(max)
Maximum output voltage
0-100KV ( Â adjustable)
Maximum powder injection
600g/min
Polarity
negative (-)
Electrical data
Power range
220V/110V
Frequency
 50HZ /60HZ
Temperature range in use
-10 ºC+50 ºC
Pneumatic data
Maximum input-air pressure
 10kg/cm
Optimum input-air pressure
 6kg/cm
Minimum input-air pressure
4kg/cm
Â
Maximum water vapor content or compressed air
1.4g/NÂ m3
Maximum oil vapor content of compressed air
0.1ppm
Â
Maximum compressed-air consumption
 13.2 m3/h
Â
Your Best Choose!!!
HICOLO make powder coating and spray booths.
this new powder coating booth with PLC controller,could control the powder coating booth more accurate.we could provide you the powder coating booth that will fit your needs. the powder coating spray booth fans draw air through filters . as the cartridge filters load,air flow decreases and the negative pressure rises within the air handler. a timer activates a system of air purging valves that clear the cartridge filters of the accumulated powder to ensure max filter life.
Durable, long-life powder-coated steel structure with high-quality galvanized canopy and floor.
Low-profile booth base eliminates operator platforms
Requires only quick, easy connect electrical and pnematics to start production
Specifications:
Operator dimensions: 2300x 1700x1500mm
Overall dimensions: 2550x 2240x 2140mm
Weight:450kgs
Power suppl : electric
Nominal power: 3.5KW
Voltage: 380V
Frequeny : 50-60hz
Filter: 4 pcs polyester , easy for change
Filter cleaning system: Pneumatic
Powder coating machines COLO-800D
COLO classic powder coating spray gun ,working so good for most of the workpieces.
Powder Gun
Gun weight:
500G
Rated output voltage
24VDC
Input voltage
 - 200kv
Maximum output current
180Ua(max)
Maximum output voltage
0-100KV ( Â adjustable)
Maximum powder injection
600g/min
Polarity
negative (-)
Electrical data
Power range
220V/110V
Frequency
 50HZ /60HZ
Temperature range in use
-10 ºC+50 ºC
Pneumatic data
Maximum input-air pressure
 10kg/cm
Optimum input-air pressure
 6kg/cm
Minimum input-air pressure
4kg/cm
Â
Maximum water vapor content or compressed air
1.4g/NÂ m3
Maximum oil vapor content of compressed air
0.1ppm
Â
Maximum compressed-air consumption
 13.2 m3/h
Â
Your Best Choose!!!