150L Vertical Type Water Cooling Dry Screw Oil Free Vacuum Pump
Fluid Ends,Fluid End Assembly,Fluid End Spare Parts,Fluid End Of Mud Pump Jiangyin Yida Machinery Manufacturing Co.,Ltd. , https://www.yidamachinery.com
The Vertical Screw Vacuum Pump is designed for environments with an ultimate pressure of more than 5 Pa. Thanks to its efficient gas flow and easy discharge of dust and condensate, it minimizes downtime. This makes it ideal for applications involving large amounts of gas, dust, and condensate, effectively preventing the buildup of these materials. Its reliability and ease of maintenance are further enhanced by advanced sealing technology and full-side hydrodynamic jacket cooling.
**Key Features:**
- **Easy Maintenance & Self-Diagnostics:** Reduces maintenance costs and improves operational efficiency.
- **Secondary Recovery of Organic Solvents:** Helps save production costs.
- **Low Noise Level:** One of the quietest in the PRC market.
- **Zero Discharge of Wastewater:** Environmentally friendly design.
- **Strict Product Specifications:** Meets PRC military standards AP 1676.
- **High Operational Reliability:** Ensures long service life and consistent performance.
**Technical Specifications:**
| Specification | Unit | Value |
|--------------|------|-------|
| Nominal Displacement Capacity | L/s | 150 |
| m³/h | 540 | |
| CFM | 321 | |
| Ultimate Pressure | Pa | ≤5 |
| Torr | 0.037 | |
| mbar | 0.05 | |
| Motor HP | 20 | |
| Power (50Hz) | kW | 15 |
| Power (60Hz) | kW | 15 |
| Voltage | V | 380 |
| Rotational Speed (50Hz) | RPM | 2900 |
| Rotational Speed (60Hz) | RPM | 3480 |
| Inlet & Outlet Port | DN mm | DN80/PN1.6 |
| DN inches | DN3.15/PN1.6 | |
| Cooling Water | m³/h | 7 |
| GPM | 25.7 | |
| Cooling Water Pressure | MPa | 0.1–0.25 |
| Weight | kg | – |
| lbs | – | |
| Dimensions | mm | 1000×700×890 |
| Inches | 39×27.6×35 | |
**Working Principle:**
When the drive system is operating, power is transferred to the timing gears, which rotate the parallel rotors in opposite directions at high speed. This rotation allows the pump to draw in gas from one end and compress it within a sealed chamber before discharging it from the other end. The compressed gas then enters a condensing unit, where any condensable components are separated and drained. Non-condensable gases are released through the drainage tube, completing the evacuation process in a single rotation cycle.
The gas evacuation process consists of three main stages: intake, compression, and discharge. As the parallel rotors rotate in opposite directions, their interlocking teeth ensure a continuous and smooth operation throughout the entire cycle.
For more information or custom requirements, please contact Adekom Kompressoren (Dongguan) Limited directly.
**Contact Us:**
Adekom Kompressoren (Dongguan) Limited
Tel: +86 769 88802320
Fax: +86 769 88803230
Web: www.adekom.com.hk