Large LCD Screen Super Scanner Metal Detector Wander
MC introduces advanced technology and improve the Mast Climbing Platform,
the Mast Climbing could be used to :
Biulding ,Glass screen wall,brick building, wall decoration, Industrial Coatings,building renovation
Nonstandard building structure:
Chimney dismantle,hub interchange renovation, silo building maintenance,cooling tower building maintenance, bridge building and maintenance,hydropower plant construction
MC construction platform/mast climbing works with the same driving principle with the Building Hoist. Its main parts can be interchanged with building hoist such as mast sections,rack, pinion, reducing device and so on.
And its width and length can be changed according to request. It is requisite equipment in construction job. Additionally ,it is no need for foundation so that it is easy to change the working site.
Safety Features:
1. With overload
2. With balance device
3. Moving synchronize device(used in twin mast platform)
4. With anti-falling safety device( can install as client need)
5. With constant speed safety device, prevent platform sliding down overspeed
6. With hand-operation landing equipment, it can be landed by man when supply power cut off.
Mast Climbing Mast Climbing,Mast Climbing System,Mast Climbing Platform,Mast Climbing Work Platform Miliscorp Industry Ltd , https://www.mctowercrane.com
Powerful LCD Screen to show the detector working status:
LCD display you the object signal, battery voltage, indicate battery low and remind you to charge,
Show you the charging progress and voltage
High sensitivity: Detects medium sized pistol from 9" distance; Large knife from 6"; Razor blades and box cutters from 3" distance; Foil-wrapped drugs and tiny jewelry from 1".
Self-calibrating: Digital microprocessor technology eliminates the need for periodic sensitivity adjustments.
Rugged, Anti-impact ABS case with reinforced coil compartment. Exceeds Mil-Std-810F (drop test) Method 516.5, procedures II and IV.
Large 8" scan surface for quick, thorough scanning.
No tools required to change standard 9V battery (excluded).
Sharp audible alarm and bright red LED indicates the detection of metal.
Momentary push button helps temporarily eliminate detection of nearby ambient metal such as rebar, metal walls.
Three-color LED indication: Green LED indicates ON; Amber LED indicates LOW BATTERY: Red LED indicates ALARM.
Operating temperatures: -35° F (-37° C) to 158° F (70° C)
Operating Temperatures
-35º F (-37º C) to 158º F (70º C)
Humidity
To 95% noncondensing
Audio Frequency
2kHz Warble
Tuning: Automatic
Indicators:
Speaker
LED Alert Lights
Green: Power ON
Amber: Battery LOW
Red: ALARM condition
Controls
Power switch (Audible / Off / Silent)
Interference Elimination Momentary Switch
Battery
Single 9 volt battery provides up to 80 hours of
Normal operation.
Optional: NiMH rechargeable battery,
110v/220v charger, earphone
Large LCD Screen Super Scanner Metal Detector Wander
Powerful LCD Screen to show the detector working status:
LCD display you the object signal, battery voltage, indicate battery low and remind you to charge,
Show you the charging progress and voltage
High sensitivity: Detects medium sized pistol from 9" distance; Large knife from 6"; Razor blades and box cutters from 3" distance; Foil-wrapped drugs and tiny jewelry from 1".
Self-calibrating: Digital microprocessor technology eliminates the need for periodic sensitivity adjustments.
Rugged, Anti-impact ABS case with reinforced coil compartment. Exceeds Mil-Std-810F (drop test) Method 516.5, procedures II and IV.
Large 8" scan surface for quick, thorough scanning.
No tools required to change standard 9V battery (excluded).
Sharp audible alarm and bright red LED indicates the detection of metal.
Momentary push button helps temporarily eliminate detection of nearby ambient metal such as rebar, metal walls.
Three-color LED indication: Green LED indicates ON; Amber LED indicates LOW BATTERY: Red LED indicates ALARM.
Operating temperatures: -35° F (-37° C) to 158° F (70° C)
Operating Temperatures
-35º F (-37º C) to 158º F (70º C)
Humidity
To 95% noncondensing
Audio Frequency
2kHz Warble
Tuning: Automatic
Indicators:
Speaker
LED Alert Lights
Green: Power ON
Amber: Battery LOW
Red: ALARM condition
Controls
Power switch (Audible / Off / Silent)
Interference Elimination Momentary Switch
Battery
Single 9 volt battery provides up to 80 hours of
Normal operation.
Optional: NiMH rechargeable battery,
110v/220v charger, earphone