New Products/ Double-End Cable/ Wire Stripping Cutting Terminal Crimping Machine
Anchoring parts refer to the components used to connect the overall refractory lining, refractory prefabricated parts, refractory fiber felt and furnace shell or furnace steel structure. The function of the anchor is to fix the connected lining in a certain position to resist static load, thermal stress, mechanical rotation or vibration. The anchors help prevent the material from collapsing before the ceramic bond forms during construction and heating. It also helps to uniformize the shrinkage of the material and avoid the formation of large, concentrated cracks in the lining. Metallic Anchors,Metal Anchors,Ss Anchors,Alumina Anchors Puyu kiln technology (jiangsu) CO.,LTD , https://www.anchorpy.comNew Product: Double-End Cable/Wire Stripping, Cutting, Terminal Crimping Machine
Key Features
=> Ideal for automotive harnesses and high-precision wiring systems
=> Equipped with 9 Mitsubishi servo systems for enhanced precision
=> Crimping height is precisely controlled via a digital system, with a tolerance of less than 0.03mm
=> RZT's innovative DSP control system outperforms traditional PLC systems
Standard Specifications
Item
Performance
Product Name
Full Digital Dual-End Crimping Machine
Brand Name
RZT
Model
RZT-208A
Function
Wire cutting, single end stripping, both ends stripping, single end crimping, and dual-end crimping
Capacity
Up to 3,000 pcs/hour (varies based on wire type, length, stripping length, and terminal type)
Cutting Length
27 mm – 20,000 mm
Cutting Accuracy
For lengths < 100 mm: ±0.5 mm + preset length × 0.002
Cutting Accuracy
For lengths > 100 mm: ±1.0 mm + preset length × 0.002
Stripping Length
No.1: 0.1 mm – 10.0 mm
Stripping Length
No.2: 0.1 mm – 17.0 mm
Stripping Accuracy
±0.1 mm tolerance
Crimping Force
21,500 N or 19,600 N
Detectors
Wire presence detection, wire knot detection, terminal presence, terminal crimping, stripping detection, and air pressure monitoring
Wire Gauge
AWG 14 – AWG 30 or AWG 20 – AWG 32
Power Supply
Single-phase / Three-phase AC 220V
Drive System
Mitsubishi servo motor
Air Source
>0.4–0.5 MPa, ≥60 NL/min
Dimensions
Length: 950 mm | Width: 800 mm | Height: 1290 mm (excluding protruding parts)