Beijing New Energy Automobile Design and Engineering Center completed in Foton


On August 28, the Beijing New Energy Automobile Design and Engineering Center was announced at the headquarters of Foton Motors. This is the groundbreaking of the foundation engineering of Foton Motor in October 2008 after it was put into use in the first phase of the engineering research institute building in January 2007. In the second phase of the project, the center occupies an area of ​​approximately 25,000 square meters and a total investment of more than 144 million yuan.

According to the planning of Foton Motor, the new energy vehicle design and engineering center will be mainly used for the design and research and development of new energy vehicles. The main purpose is to further integrate existing research and development resources of Foton Motor's existing new energy fields, and give full play to Foton Motor's new energy vehicles. The advantages of research and development, attracting single technology combined with the vehicle R&D platform to achieve integrated innovation, further stimulating the upstream and downstream industry chains, and attracting new partners to participate in the existing R&D system of production, education, and research.

At the same time, through the development of hardware for research and development, and as a platform to further integrate all aspects of society, we have opened up the technological innovation value chain from basic research, application development, system integration, technology transfer, and industrialization, targeting new energy vehicle vehicles. The key technologies for the integration of power systems are being studied to lay the foundation for the further development of new energy vehicles with independent intellectual property rights. At the same time, Foton Motor also hopes to use this center to continue to attract domestic and foreign industrial technology talents to join Foton, and to strengthen the research and development strength of Foton Motor in the field of new energy vehicles.

Zhao Jingguang, Secretary-General of Beijing New Energy Automobile Industry Alliance, said that the completion of the Beijing New Energy Vehicle Design and Engineering Center will further strengthen the R&D strength of the Beijing New Energy Vehicle Industry Base based on Foton Motor and enhance the attraction of Beijing New Energy Automobile Industry Alliance. force. The completion of the center is also an important step in the development strategy of Foton Motors new energy vehicles. Futian Motor will continue to focus on independent research and development of new energy vehicles as the strategic layout of the company.

Beijing New Energy Automotive Design and Manufacturing Industrial Base Strengthens

At present, the research and development capabilities of the Beijing New Energy Automotive Design and Manufacturing Industry Base have covered the Beijing New Energy Vehicle Design and Engineering Center, the Key Laboratory of Energy Saving and Emission Reduction, and the Green Energy Pilot Plant and other professional R&D and design centers to meet the needs of green energy vehicles in R&D, The needs of design, trial production, and manufacturing stages are currently the largest green energy R&D center in China.

In terms of production capacity, Beijing New Energy Automotive Design and Manufacturing Industry Base has five major manufacturing processes including chassis manufacturing, body manufacturing, electrophoretic coating, assembly and testing, and five major engine manufacturing technologies such as machining and machining, and ATPU. Among them, the passenger car manufacturing It has reached the international advanced level, and its engine manufacturing is based on its 400,000 units of production capacity and high-pressure common-rail diesel engine that can meet Euro IV, Euro V, and Euro VI emission standards. Undoubtedly, it has become the world's highest level of energy efficient light engine manufacturing base. .

Using this as a platform, the Beijing New Energy Automotive Industry Alliance, which is currently located in Futian Automobile, has attracted more and more companies to join and is growing. The alliance integrates advantageous resources in the field of new energy vehicles in Beijing and even the country, including vehicle companies, parts and components companies, research institutes and end users. The alliance was initiated by more than 50 companies including Beijing Automotive Holding Corporation, Beijing Public Transport Group and Beijing Institute of Technology. Currently, there are more than 60 enterprises such as Jingjin Electric Technology Co., Ltd., CITIC Guoan Mengguli Company and ZF Transmission Technology Co., Ltd., as well as Tsinghua. Universities, Chinese Academy of Sciences, China Academy of Launch Vehicle Technology and many other scientific research institutions have joined the alliance.

As the backbone of commercial vehicles in China, Foton Motor actively responds to the country's call for energy-saving and emission reduction and carefully plans and studies new energy automotive technologies. From 2003 onwards, Foton Motors will focus on the development and application of new energy as the core strategy for corporate development. 2005 The company invested 500 million yuan to build a key laboratory for energy conservation and emission reduction with leading domestic standards. At the same time, a dedicated new energy vehicle technology center was established to research and develop three major green energy technologies synchronized with the world: clean energy, alternative energy, and new energy. Technology, its technology is widely used in Futian production of large and medium-sized passenger cars, MPV, medium and heavy trucks and light trucks and other full range of commercial vehicles, of which two series have been commercialized.

Based on extensive market research and technical demonstration, Foton Motors has established an independent plan for its strategic development of new energy vehicles. In addition to continuous investment in hardware and R&D, Foton also plans to produce and sell 1,1,500 new energy vehicles in 2010. By 2015, the proportion of new energy vehicles will increase to more than 15%.

At present, the new energy automobile projects undertaken by Foton Motor include the 12m pure electric bus project that Beijing Bus Group plans to add in 2009; as the vehicle unit, it will jointly undertake the 11th Five-Year Plan 863 project, the fuel cell vehicle development project, with Tsinghua University; In cooperation with the Beijing Institute of Technology and the China Academy of Science and Technology, we undertook the 863 project, the hybrid vehicle technology research and development project of the rechargeable hybrid Midi, and cooperated with the Beijing Institute of Technology to develop a pure electric sanitation vehicle. Among them, the fuel cell bus has begun to assume the task of serving the Olympic Games in August 2008, and continues to operate after the successful completion of the mission. As of April 2009, three Futian fuel cell buses have been modeled and operated at Beijing's 801 line for a total of 32,000km. Operating time is 3000h, which is the most densely populated Zhongguancun area. In May 2008, Didi Electric Vehicles completed the trial production of the first prototype car. In July 2008, it completed the trial production of the first prototype car. At present, Madi Electric Vehicles has already achieved product technology. reserve.
View related topics: Beiqi Futian, Futian Automobile brand value of 22.157 billion yuan


Golf Ball Printer can print on any materials like Textile,Plastic,Leather,Glass,Metal,Acrylic,etc.,also our UV Printer can print any materials except textile without coating,more details,please contact with us.


More detial:

1. This machine wide application of personalized print: Suitable for printing on gifts, badges, signs, glasses, hair grip,
cards, leather, PVC board, crystal, wood, metal, U disk, mobile phone cases, IPAD cases and other materials.

2. Compared with those modified from R1290/1390 or R1900, our uncoated flatbed printer modified from
Epson R2000 with brand new motherboard and controller board, high resolution and stable performance.

3. Automatic height adjustment, moulding aeronautical aluminum alloy structure ensures good accuracy
and alignment.

golf ball printer



Name
Golf ball printer
Print head
DX5
Printer size
33*43cm(33*60cm)
Printing speed
A4 photo/111s
Printng resolution
5760*1440dpi
Nozzles
90*6=540
Interface
USB2.0
Net weight/Gross weight
55Kg/60Kg
Printer size
750*630*510mm
Height adjustment
Automatic
Working power
110V/220V   50/60Hz    30-75W
Operation system
Windows 7/XP/2000/Vista etc
Temperature
5-35o



Golf Ball Printer

Golf Ball Printer,6 Colors Golf Ball Printer,A3 Golf Ball Printer,Golf Ball Digital Printer,Golf Ball UV Flatbed Printer

Shenzhen Refinecolor Technology Co., LTD. , https://www.rfcprinter.com