BSPT Brass T Branch Nickel-Plated Push in Pneuamtic Fittings
60Mn material Hot Rolling Ball have very good wear resistance and not broken, breakage is lower than 1%, and it have high impact value. Jinan Zhongwei 60Mn hot rolling ball have the advantage of large output, stable quality. Our 60Mn Hot Rolling Grinding Ball in the size ranging from 20mm to 60mm, which chemical composition: C:0.55-0.65, Si:0.17-0.37, Mn:0.7-1.0, Cr:≤0.25, P:<0.04, S:<0.04, and Hardness is 57 to 63HRC, mainly used to mining, cement plant and thermal power station.
60Mn Hot Rolling Grinding Ball Grinding Steel Ball,60Mn Grinding Steel Ball,60Mn Grinding Ball,60Mn Hot Rolling Grinding Ball Jinan Zhongwei Casting And Forging Grinding Ball Co.,Ltd , https://www.cngrindingballs.com
Products' Description:SAJPZA08 Equal Cross Connector, Nickel-Plated Brass Push-to-Connect Fitting, 08mm Tube O.D × 08mm Tube O.D , Collet Material: H59 brass , Material of Construction: Nickel Plated Brass, Pressure (PSI) 1000, Temp Range -20 To 100 Deg , Weight : 60.00g,Height: 53.00mm,Nickel Thickness: 10um, O-ring: NBR-A , Package Quantity: 10Pcs. Warranty:18 months ,.
Cautions:
The repeatedly connecting or disconnecting the Nylon or PU Hose into Brass Nickel-PlatedPush in Fittings , which will cause the Scratches covered with Nylon or PU Hose ,The leakage is possible, the correct way is cut off the scratched Nylon or PU Hose end and insert it again to avoid the leakage.
Products' Description:SAJPZA08 Equal Cross Connector, Nickel-Plated Brass Push-to-Connect Fitting, 08mm Tube O.D × 08mm Tube O.D , Collet Material: H59 brass , Material of Construction: Nickel Plated Brass, Pressure (PSI) 1000, Temp Range -20 To 100 Deg , Weight : 60.00g,Height: 53.00mm,Nickel Thickness: 10um, O-ring: NBR-A , Package Quantity: 10Pcs. Warranty:18 months ,.
Cautions:
The repeatedly connecting or disconnecting the Nylon or PU Hose into Brass Nickel-PlatedPush in Fittings , which will cause the Scratches covered with Nylon or PU Hose ,The leakage is possible, the correct way is cut off the scratched Nylon or PU Hose end and insert it again to avoid the leakage.