Class 1000 Threaded Cross B464 Uns N08020, Alloy 20

Model NO.: SS Forged Fitting Cross
Model NO.: SS Forged Fitting Cross
 Product Type:
        
         Full coupling, Half coupling, Reducing coupling, Reducer insert, Union, 90° elbow, 45° elbow,
        Tee, Cross, Cap, Square head plug, Hex head plug, Round head plug, Hex head bushing,
        Union, Reducing swage, Welding Boss, Mitre Boss, High Pressure Boss, Socket Reducing Insert.
 
Size:
       
        1/2" to 4" (DN15~DN100)
 
Range(Wall Thickness):

        3000LB to 9000LB
        XS, Sch80, Sch160, XXS.
 
Standard:

        ASME/ANSI B16.11, MSS SP-79, MSS SP-83, MSS SP-95, MSS SP-114, JIS B2316, JIS B2302 etc.
 
Material:

        Stainless steel, Duplex steel, Alloy steel, Carbon steel, Low-temperature steel, Nonferrous metals (Nickel alloy, Aluminum alloy, Titanium alloy, etc.).
 
+ SOCKET WELD FITTINGS

        A socket weld is a type of pipe connection where the pipe is inserted into a recessed area of a valve, fitting, or flange. Unlike butt-weld fittings, socket weld fittings are typically used for small-diameter piping (Small Bore Piping), usually NPS 2 or smaller.

        To connect pipes to valves, fittings, or other sections of piping, fillet-type seal welds are commonly used. Socket-welded joints are ideal when high leakage integrity and structural strength are key design considerations.
        Although fatigue resistance is lower than in butt-welded joints due to the use of fillet welds and abrupt geometry, it is still superior to most mechanical joining methods.
        These fittings are widely used in high-pressure industrial applications.
 
Types of Threaded Fittings by Class and Size
Description
Class Designation
 
3000 6000 9000
Elbows 45 and 90 degrees, Tees, Crosses, Couplings, Half-Couplings, End or Pipe Caps 1/2 - 4 1/2 - 2 1/2 - 2
1/2 - 4 1/2 - 2 1/2 - 2
1/2 - 4 1/2 - 2 1/2 - 2
Pipe Size by Wall Thickness SCH 80 / XS SCH 160 XXS
Plugs and Bushings are not identified. They may be used up through Class 6000 NPS.

+THREADED FITTINGS

        Threaded joints are one of the oldest methods of connecting piping systems. Similar to socket weld fittings, threaded fittings are commonly used for small-diameter piping (Small Bore Piping), generally NPS 2 or smaller.

Types of Threaded Fittings by Class and Size
Description

Class Designation
2000 3000 6000
Elbows 45 and 90 degrees, Tees, Crosses, Coupling, Half-Coupling, Cap 1/2 - 4 1/2 - 2 1/2 - 2
1/2 - 4 1/2 - 2 1/2 - 2
1/2 - 4 1/2 - 2 1/2 - 2
Pipe Wall SCH 80 / XS SCH 160 XXS
Plugs and Bushings are not identified. They may be used up through Class 6000.  

Manual Valve

types of manual valves,stainless steel ball valve,industrial ball valves,industrial butterfly valves

Zigong Yibaijie , https://www.oz-yibaijie.com