Driving in foggy and rainy weather, avoid direct lighting

Driving in foggy and rainy weather, avoid direct lighting

The winter weather in the south is changeable, especially when the owner goes out driving. Fog and rain weather visibility is low, drivers should pay attention to slow down the speed of safety. The owner of the car remembers to use the high beam. This is due to the fact that the high beam is on the top, and the light that is emitted is reflected by the fog and forms a bright white in front of the car. The person driving the car cannot see anything.

Reducing the speed of the vehicle Keeping the distance between the owner and the driver in the fog is extremely low, it is best to open the “double flash” on the car. Luo Shengmin explained that because of the regulations, “dual flashlights” are lights used by vehicles and drivers in emergency situations. Visibility in foggy days is declining, affecting the observation and judgment of drivers, and it is more prone to traffic accidents. The owner needs to adjust the speed of the fog at any time according to the size and visibility of the fog, so as to ensure that there is an emergency time to deal with the situation.

In addition, due to the slippery road, tire adhesion will be greatly reduced, and emergency brakes are prone to slippage. Therefore, the owner of the vehicle must first reduce the speed of the vehicle and maintain a proper safety distance from the preceding vehicle.

The whistle can be properly reminded that “the rain and fog owners should not use the high beam, because the high beam line is high, it is easy to cover the fog lamp, causing other drivers to block the line of sight, it is dangerous.” Luo Shengmin told reporters, fog driving, certain To open front and rear fog lights, tail lights, width lights and low beam lights. As a car owner, it is always impolite to sound a horn, but it really works when it's foggy. Especially the American cars and European models, the horn sound penetration in the air is very strong, the sound will be transmitted very far, with a high alert.

The use of air-conditioning clever mist removal In addition, due to the large temperature difference between the inside and outside the car, rain and fog driving, fog will often appear on the front windshield of the vehicle. Luo Shengmin said that it is a good idea to evenly spray a layer of anti-fogging agent on the outside of the glass, and spray household detergent and soapy water on the glass, dry it, and then wipe it with a soft dry cloth.

In addition, the air conditioning mode in the vehicle can be changed to a defrosting/defrosting mode, or a glass anti-fogging agent for automobiles can be directly used to form a protective film on the glass, which effectively prevents moisture from accumulating on the glass to form fog.

Magnesium Die Casting

Magnesium Die Casting,Magnesium Alloy Die-Cast,Magnesium Alloy Die Casting In Automobile,Magnesium Alloy Die Casting Processing

Shenzhen SCZY Technology Co.,Ltd , https://www.sczyltd.com