Safety technical measures for transporting drilling rigs

January 23, 2020

Team ventilation to the # 45 coal seam blasting process lane construction ahead of the blast hole, you need to ZDY-1900 hydraulic drilling rig from level +620 45 # coal shipped to South Lane lane blasting process, in order to prevent personnel injury accidents, especially Prepare the following safety technical measures:
1. Workers entering the south lane of the 45# coal seam of +620 level must wear gas masks. Those without gas masks are strictly prohibited from entering the south lane.
2. Before transporting the hydraulic drilling rig , the operator should remove the hydraulic pipes of each part and seal the joints.
3. Two hoists must be prepared for the hydraulic rig to transport and hoist and move the hydraulic rig.
4. When lifting and moving the hydraulic drilling rig, it is necessary to find a firm anchor or anchor cable as the lifting point, and the drilling rig is connected with the hanging wire rope buckle.
5. When the hydraulic drilling rig is transported in the roadway, the operator is prohibited from walking or staying on both sides of the rig.
6. When the hydraulic drilling rig is transported on the slope, the drilling rig must be tied firmly, and the two hangings are used alternately.
7. Personnel working on the slope road must wear a safety rope to prevent the person from slipping and falling from the slope.
8. When the hydraulic drilling rig is transported on the slope road, it is strictly forbidden to stand at the lower mouth, and an operator should be arranged to guard the lower mouth to prevent other personnel from being injured by the drill or coal block from the lower mouth.
9. Personnel in charge of lifting the hydraulic rig on the slope road are strictly prohibited from working on both sides or below of the rig to prevent the sling from decoupling and injuring personnel.
Supplementary measures
1. During the decentralization or lifting of the rig, the ventilation department must arrange for the leadership to follow the scene.
2. During the lifting or lowering of heavy objects, it is necessary to set a warning at the lower mouth and strictly prohibit the passage of personnel.
3. During the lifting or lowering of heavy objects, it is strictly forbidden for personnel to walk;
4. During the decentralization or lifting of materials, the weight of all lifting or lowering materials must be less than the lifting device, and there must be sufficient safety factor.
5. Safety ropes must be used during the lifting or lifting of all heavy objects.
Traction Motor System
Traction Motor,Ev Traction Motor System,Traction Motor System,Electric Traction Motor
Chengdu Huachuan Electric Parts Co., Ltd. , https://www.chcd-global.com