2nd Alarm house fire in Lake Zurich 8-23-13
This is from Larry Shapiro: Lake Zurich Fire Department received a call at 4:34 AM reporting a house fire at 23722 S. Lakewood Lane in unincorporated Lake County. The first arriving companies found a fully involved frame structure. The alarm was escalated to a Box Alarm and then a second alarm for additional tankers, as the neighborhood lacks hydrants. The house, which was reportedly vacant, was completely destroyed. Â Only the lower part of the front wall near the garage remained standing. Photo by Larry Shapiro Firefighters working on hot spots in the remains of the home. Photo by Larry Shapiro Firefighters working on hot spots in the remains of the home. Photo by Larry Shapiro Firefighters cutting out the remaining garage arch. Photo by Larry Shapiro This was the first engine to arrive from Lake Zurich. Photo by Larry Shapiro Round Lake tanker being emptied. Photo by Larry Shapiro Two portable water tanks were set up for supply. Photo by Larry Shapiro The response included four engines from Lake Zurich, along with mutual aid units from Mundelein, Palatine, Arlington Heights, and Fox River Grove. Ladder trucks came from Wauconda and Buffalo Grove. Ambulances were dispatched from Lincolnshire-Riverwoods and Libertyville, while tankers arrived from Long Grove, Cary, Fox Lake, Round Lake, Countryside, Palatine Rural, and Nunda. The Mess Canteen provided support, and chief officers were expected from Wauconda, Countryside, Buffalo Grove, Long Grove, and Palatine. Â Apparatus staged on the block. Photo by Larry Shapiro Long Grove tanker supporting the Lake Zurich engine. Photo by Larry Shapiro View of the B-Sector. Photo by Larry Shapiro View of the B-Sector. Photo by Larry Shapiro Long Grove Tanker 55 supporting the Lake Zurich engine. Photo by Larry Shapiro The second Lake Zurich engine was drafting from the portable tanks. Photo by Larry Shapiro I arrived after the structure had already collapsed and have some late photos and a video that will be posted shortly. Â Stereo Light Curing Molding - Sla STEREO LIGHT CURING MOLDING - SLA Sla,Sla 3D Printing Service,Sla Printing Service,Sla Rapid Prototyping Ningbo Rongna Technology Co.,Ltd , https://www.service-machining.com
It mainly uses photosensitive resin as a raw material, and utilizes the characteristic that liquid photosensitive resin will cure quickly under ultraviolet laser beam irradiation. The photosensitive resin is generally liquid, and it immediately initiates a polymerization reaction and completes curing when irradiated with a certain wavelength of ultraviolet light (250 nm to 400 nm). SLA focuses on the surface of the light-curing material by focusing ultraviolet light of a specific wavelength and intensity to solidify it sequentially from point to line and from line to surface, thereby completing the drawing of a layered cross-section.